1. Before using the electronic all-in-one test machine for testing, suitable limits must be set.
2. Check the electronic all-in-one tester cable to prevent cable damage and accidental disconnection.
3. Be careful when installing or removing samples, components or structural parts.
4. Make sure that the transition from computer control to manual control room beams does not move, otherwise do not put the test system offline.
5. During the test, the test operator should not leave the test site, after an emergency, press the emergency stop switch. The head, hands, and rest of the body should not be extended into the operating space of the test machine, let longer placed around the fixture.
6. Check the upper and lower limit positions before the test and turn on the emergency stop switch.