There are many types of testing machines, and they are widely used. It is important to fully understand their uses when using testing machines, which can help you better use them and avoid problems in the process of use. The following small series introduces the uses of several testing machines:

The purpose of material testing machine is to test the mechanical and technological properties of metal or non-metallic materials under various conditions or environments!

The tensile testing machine is also called the tensile testing machine. The tensile testing machine is used to slowly apply load on both ends of the sample to make the working part of the sample subject to axial tension, causing the sample to extend along the axial direction until it is generally broken. The tensile strength of the material can be measured through the tensile test of the sample.

The compression testing machine, different from the tensile test, is used to measure the strength, relative shortening rate and section enlargement rate of materials under static pressure. The basic requirement for the compression pattern is that the two support end faces should be parallel to each other.

Shear testing machine is used to determine the shear resistance of materials.

Impact testing machine is used to determine the toughness or brittleness of the sample by using the energy difference before and after the pendulum impacts the sample. It is characterized by large impact force, short action time and rapid change.

Bending tester, literally, is used to measure the bending strength of materials.

Hardness testing machine is a very fast and economical machine, and it is also a test that does not damage the mechanical properties.