How to choose the electronic tension machine correctly

The main contents of the electronic tensile machine are considered as follows: when purchasing, the tension range of the materials to be tested must be considered. Different tension ranges determine that the sensors used are different, which also determines the structure of the tensile machine, but has little impact on the price For general flexible packaging manufacturers, the tension range of 100 Newton is sufficient

Therefore, it is also decided to use single arm type The corresponding structure of single arm is door structure, which is used for large tension, such as tons or more Therefore, flexible packaging manufacturers basically do not need

Test plan: according to the performance requirements of flexible packaging film, the travel can be 600-800mm The elongation of the material is more than 1000%, which can be used for 1000 or 1200mm

Standard configuration problem: intelligent three basic configurations: host, microcomputer and printer. If the microcomputer has strong performance, it can be printed directly It can also be equipped with ordinary computers With the help of computer, complex data analysis such as data editing, local amplification, report adjustment and group statistical analysis can be carried out

How to use electronic tension machine correctly

The main contents of the electronic tension machine are as follows: first, turn on the software measurement and control system, then turn on the power supply and select the corresponding test type Test run: test the lifting speed of the electronic tension machine to ensure the normal operation of the system New record: fill in the corresponding batch number, number, test environment, sample size and other relevant data according to the test quantity - new construction - test record number

Test sample: adjust the position of the sample - put the sample in place Selection range: select appropriate test force and deformed gear (range) Zero clearing: zero point of test force, deformation and displacement Test speed: standard operation, low speed and unconditional adjustment End condition: select the corresponding test condition according to the sample Test start: click the "test start" button to start the test

End of test: after the test, the "end of test" button will be pressed automatically Test results: click the "analysis" button to view the corresponding test results Continue the experiment: click the "test" button to return to the test operation interface; The "next" button will switch to the next test record and repeat the 5-11 step test Save data: if you need to save the test data, please press "save" button to save the test data to the database for viewing

Print report: if the test results need to be printed, press the "output report" button to output the test results to word document and print them Shutdown: turn off the power supply of the tester, and turn off the software control system and computer