The test machine uses hydraulic loading and computer screen display to show the test results. It is easy to operate and the test readings are accurate and reliable. It is mainly used for the tensile performance test of concrete prestressing strands. Additional accessories can be used for tension, compression, bending and shear tests of general steel and other metal materials, as well as compression and bending tests of general materials, plastics, cement and concrete.
This machine has the function of loading speed display, which can realize the loading speed required by the sample.
This machine has reserved networking and upgrading interface. It can be upgraded to servo universal testing machine according to user's needs. It is an ideal product for updating.

Installation of Microcomputer Controlled Steel Strand Testing Machine
1. Installed on a stable workbench or on a flat and firm ground;
2. Keep away from the places with high air mobility such as doors and windows.
3. There is no obvious electromagnetic interference in the environment.
4. Prevent sun exposure or close to air-conditioning equipment, etc.
5. Ambient temperature: 20 + 5 (?) C and fluctuation less than 2 (?) C per hour; Relative humidity: <80%;
6. Power supply frequency: 50Hz;
7. Power supply voltage: AC 380 + 10V 50Hz power 3.0KW.
8. It is required that the power supply must have grounding wires, which should be paid special attention to by users.
Because of the grounding protection of WAW-1000G microprocessor-controlled strand tester, if the power supply with grounding wire is not used, in case of leakage, it may hurt people.
9. Level adjustment:
The level instrument is placed on the platform of the test machine to adjust the four adjustable legs below, so that the test platform of the test machine is in a horizontal state. At this time, the host is installed.