The pressure testing machine is mainly suitable for testing various physical and mechanical properties of rubber, plastic sheet, pipe, profile, plastic film, wire and cable, waterproof coil, metal wire, carton and other materials. Many people do not understand the pressure testing machine, especially the precautions for use, and how to use it correctly. Because if the pressure testing machine cannot be used correctly, the final measurement data will be affected, and accurate pressure data cannot be obtained. Now, follow our company's technicians to understand the points to pay attention to when operating the pressure test machine and the maintenance precautions of the equipment!

 Points to note when operating a pressure tester
1. Before testing, in addition to paying attention to the problems of equipment, also pay attention to the choice of materials. Only by selecting the appropriate materials can accurate data be tested. There are restrictions on the materials tested by the testing machine. The main measurements are metal and non-metallic materials, so we must pay attention to the choice of materials.
2. Check the pressure testing machine Before using the testing machine, pay attention to checking the equipment. After the equipment is used, the parts of the pressure testing machine may be placed in non-standard locations, or there is a problem with one part of the equipment, which will cause the equipment to measure. Something went wrong.
3. When testing the test sample, we must pay attention to the problem of the standard line to ensure the accuracy of the measurement. If the standard line is not placed in a standard place, it will definitely affect the measurement.
4. During the measurement of the pressure tester, do not adjust it arbitrarily, because the equipment is already working. If it is adjusted at will, it will affect the measurement results of the equipment, and may also cause obstacles to the equipment and cause the test to fail to run smoothly. Adjust the device anywhere.

Second, the precautions for maintenance of pressure testing machine
1. As a high-tech testing equipment, we can find that there are different structures in the pressure testing machine. During the quarterly maintenance process, the relevant staff needs to perform a corresponding inspection for each structure of the equipment to ensure that the lubricated parts are all Adequate lubrication measures have been achieved.
2. For the main part of the pressure testing machine, a thorough and effective inspection is also required, and it is ensured that no abnormal noise or other problems will occur during use. In addition, there are different buttons and control keys in the pressure test machine, which must be checked in the quarterly maintenance plan to see if they can be flexibly controlled.
3. At the present stage, the test machine devices launched by different manufacturers are also equipped with corresponding protective devices and equipment control device systems. Everyone needs to check these two key points to ensure that the overall performance of the equipment is better protected.
4. Carry out cleaning and maintenance of the dead spots, and check the relevant performance of the equipment to see if you can make accurate tests.
5. Are the cables and wires of the pressure testing machine already experiencing aging or damage? Once found, they must be replaced in time.
6. The pressure testing machine has many different fixing screws. Pay attention to whether the screw nut of each part is loose or rusty. If any parts of the testing machine are found to be defective, they need to be replaced at the first time.
7. Make sure that the equipment circuit has a good grounding condition and there are no missing or damaged components. If there are any, you must order the original manufacturer's components to replace them to avoid affecting the distortion of the later test data.

The above are the points that our technicians should pay attention to when operating the pressure testing machine and the maintenance precautions of this equipment. I hope it will be helpful to everyone. In addition to the maintenance of the pressure testing machine, we also need to pay attention to the daily basic cleaning of this type of equipment. Based on the frequency of use of this type of equipment, we must develop different maintenance programs. Perform effective cleaning and maintenance to ensure more accurate results in subsequent tests.