In mechanical property testing of materials, testing method standards are critical for ensuring accurate, reliable, and comparable results. Below are common international and domestic testing standards categorized by test type with examples. 1. Tensile
The Cld-3 Static cone penetration tester is a device used for geotechnical engineering surveys. It can measure parameters such as the specific penetration resistance of soil. Here is an introduction to its general
The standard number is GB/T1499.2-2018 and will be officially implemented on November 1, 2018. The main changes in this standard compared with GB/T 1499.2-2007 are as follows: - increased smelting methods; - canceled
This standard specifies the test method for mechanical properties of ordinary concrete. This standard mainly performs compressive strength test, axial compressive strength test, static compressive elastic modulus test, splitting tensile strength test and
Cangzhou Shengshi Weiye and Cangzhou Huaheng Testing Instrument Co., Ltd. are two production companies under the Shengshi brand