Electronic universal testing machine is a commonly used material testing machine, which can be used to test materials such as rubber, plastic, leather, metal, nylon thread, fabric, paper and aviation, packaging, construction, vehicles, etc. , Pressure test, peel test, tear test, shear bending test. The electronic universal testing machine has very high accuracy requirements. If the testing machine cannot guarantee clean and dust-free, dust entering the hydraulic system will cause very serious consequences such as clogging the valve hole and scratching the surface of the piston. And how to properly clean the electronic universal testing machine?

Cleaning of electronic universal testing machine
1. Regularly check the screws in the jaw area, and if they are loose, tighten them in time;
2. Regularly check the transmission of the sprocket. If it is found loose, please re-tension the tensioner;
3. During the test, the bending tester will inevitably generate some dust, such as oxide scale, metal debris, etc., which will not only cause wear and scratch on the surface of some parts;
4.The fixtures equipped with the electronic universal testing machine should be coated with anti-rust oil for storage;

The above are all the operating steps of the electronic universal testing machine and how to properly clean the electronic universal testing machine. I hope it can help everyone.
Regularly apply anti-rust oil to the parts that are easy to rust. Avoid the collision between the jaws of the fixture or the relatively sliding surface of the fixture, and keep it clean. If you do not use it for a long time, you must also take dust prevention measures.