What you need to pay attention to when installing the universal testing machine:
First of all, the universal testing machine needs to be installed in a clean, dry, no vibration, and indoor temperature in the room of 20 to 10 degrees, while also doing beam bending test, can also use the extensometer in the test; installed When you need to leave enough space around the device. The main body and dynamometer of the universal testing machine shall be installed on the concrete. The size of the base shall be installed according to the shape and the rules of the foundation drawing, leaving the holes for the anchor screws and the lower jaw screws and other wires and pipes.
Secondly, the upper plane of the foundation must be very flat. When the alignment is correct, the level should be used. When the installation foundation is dry, the universal testing machine can be installed. After the main body and the dynamometer are respectively transported to the concrete, the demand basis The appearance and foundation map are adjusted, and the interval and direction between the main body and the dynamometer should be ensured during the adjustment.

In addition, when installing, you can also use some small iron pieces to insert into the main body and the bottom of the dynamometer and then align. The main body can be measured at different positions of the two columns in the vertical and horizontal position of the two columns when the initial alignment is performed, and then the room type level can be used for measurement. Use a square level to lean against the vertical and horizontal positions on the outer surface of the cylinder to align the plumbness of the equipment.
Finally, after the initial accuracy of the equipment is corrected, the initial operation is stopped after the oil pipe, the power supply, and the oil filling are turned on. If the initial operation is smooth, the accuracy of the equipment is stopped. When looking for a positive time, use the square level instrument to lean on the working platform, find the vertical cylinder sag, adjust or increase or decrease the horn under the base, and control the error within a certain range.
When installing the universal testing machine, it is necessary not only to ensure professionalism, but also to pay attention to precision. Of course, in the process of installation, various details must be ensured. Therefore, when you purchase, you should try to find a production with high professional qualification. Enterprises, because such companies can not only guarantee the quality of equipment, but also provide professional installation services and technical support as well as after-sales service.