HWY-10 High and low temperature digital display constant temperature water bath
HWY-10 high and low temperature digital display constant temperature water bath is a multifunctional device commonly used in laboratories
Application overview:
This water bath is suitable for the maintenance of various test pieces. The control range is the instrument used under normal temperature conditions, and it is equipped with a double refrigerator. It has a fast cooling speed and can be linked to the penetration to do various temperature tests. It has the advantages of low noise and high constant temperature precision, and is widely used. It is an indispensable equipment for testing and testing units.
Technical Parameters
Temperature control range: 0 ~ 80 ℃
Power supply voltage: 220V
Temperature control accuracy: ± 0.1 ℃
Water bath size: 460 * 280 * 240mm
Heating power: 1000w
Cooling power: 2 * 150W
HWY-10 high and low temperature digital display constant temperature water bath Main features
1.Precise temperature control: It has two sets of temperature control systems. Heating and cooling can be set by operating the temperature controller. It can automatically control the temperature of the bath. The temperature control accuracy can reach ±0.2℃, which can meet the precise temperature requirements of different experiments.
2.Circulation function: It contains a circulation device inside. In the constant temperature bath, the temperature can be kept stable in other closed circulation systems to ensure temperature uniformity.
3.Structural design: The overall structure is an integrated structure, the outer shell surface is sprayed with plastic, and the stainless steel box cover is beautiful and corrosion-resistant. The box cover is equipped with a temperature control system, and there is a drain valve and an external power socket on the back of the constant temperature box.
HWY-10 high and low temperature digital display constant temperature water bath usage precautions
1.Water adding requirements: Before use, water must be added to the water tank. The amount of water must not be less than the minimum water level to prevent the electric heating tube from being exposed to the water surface and burning out.
2.Power connection: 220V AC must be used, a three-pin plug is used, and grounding is required to ensure safe use.
3.Temperature setting: When setting the temperature, the temperature selection switch should be turned to the setting end, the temperature selection knob should be adjusted, and the digital display reading should be observed at the same time to set the required temperature value.
4.Avoid collision: There is a metal temperature sensor between the electric heating tubes in the water tank. Do not collide to avoid temperature control failure.
5.Regular cleaning: After each use, the instrument should be cleaned immediately, the water in the water bath pot should be drained, the coarse debris in the water bath pot should be brushed off with a brush, and the stains in the pot should be removed.
